Powder bed fusion-laser beam (PBF-LB) three-dimensional (3D) printing: Influence of laser hatching distance on the properties of zolpidem tartrate tablets.

Laser sintering, known as powder bed fusion-laser beam (PBF-LB), offers promising potential for the fabrication of patient-specific drugs. The aim of this study was to provide an insight into the PBF-LB process with regard to the process parameters, in particular the laser hatching distance, and its influence on the properties of zolpidem tartrate (ZT) tablets. PHARMACOAT® 603 was used as the polymer, while Candurin® Gold Sheen and AEROSIL® 200 were added to facilitate 3D printing. The particle size distribution of the powder blend showed that the layer height should be set to 100 µm, while the laser hatching distance was varied in five different steps (50, 100, 150, 200 and 250 µm), keeping the temperature and laser scanning speed constant. Increasing the laser hatching distance and decreasing the laser energy input led to a decrease in the colour intensity, mass, density and hardness of the ZT tablets, while the disintegration and dissolution rate were faster due to the more fragile bonds between the particles. The laser hatching distance also influenced the ZT dosage, indicating the importance of this process parameter in the production of presonalized drugs. The absence of drug-polymer interactions and the amorphization of the ZT were confirmed.

Formulation and characterization of immediate-release oral dosage forms with zolpidem tartrate fabricated by digital light processing (DLP) 3D printing technique.

The introduction of three-dimensional (3D) printing in the pharmaceutical field has made great strides towards innovations in the way drugs are designed and manufactured. In this study, digital light processing (DLP) technique was used to fabricate oral dosage forms of different shapes with zolpidem tartrate (ZT), incorporated within its therapeutic range. Formulation factors, such as poly(ethylene glycol) diacrylate (PEGDA) and poly(ethylene glycol) 400 (PEG 400) ratio, as well as water content, were varied in combination with the surface area/volume (SA/V) ratio to achieve immediate drug release. Hypromellose (HPMC) was used as a stabilizing agent of photoreactive suspensions in an attempt to prevent drug sedimentation and subsequent variations in drug content uniformity. Oral dosage forms with doses in the range from 0.15 mg to 6.37 mg, showing very rapid and rapid drug dissolution, were successfully fabricated, confirming the potential of this technique in drug manufacturing with the ability to provide flexible dose adjustments and desirable release profiles by varying formulation factors and geometry of 3D models. DSC (differential scanning calorimetry), XRPD (X-ray powder diffraction) and scanning electron microscopy (SEM) showed that ZT remained in a crystalline form within printed dosage forms and no interactions were found between ZT and polymers.

Tailoring Atomoxetine Release Rate from DLP 3D-Printed Tablets Using Artificial Neural Networks: Influence of Tablet Thickness and Drug Loading.

Various three-dimensional printing (3DP) technologies have been investigated so far in relation to their potential to produce customizable medicines and medical devices. The aim of this study was to examine the possibility of tailoring drug release rates from immediate to prolonged release by varying the tablet thickness and the drug loading, as well as to develop artificial neural network (ANN) predictive models for atomoxetine (ATH) release rate from DLP 3D-printed tablets. Photoreactive mixtures were comprised of poly(ethylene glycol) diacrylate (PEGDA) and poly(ethylene glycol) 400 in a constant ratio of 3:1, water, photoinitiator and ATH as a model drug whose content was varied from 5% to 20% (w/w). Designed 3D models of cylindrical shape tablets were of constant diameter, but different thickness. A series of tablets with doses ranging from 2.06 mg to 37.48 mg, exhibiting immediate- and modified-release profiles were successfully fabricated, confirming the potential of this technology in manufacturing dosage forms on demand, with the possibility to adjust the dose and release behavior by varying drug loading and dimensions of tablets. DSC (differential scanning calorimetry), XRPD (X-ray powder diffraction) and microscopic analysis showed that ATH remained in a crystalline form in tablets, while FTIR spectroscopy confirmed that no interactions occurred between ATH and polymers.